• The ability to purge the sample point ensures optimal retrieval of a representative, contamination free sample.
  • The S32 type sampler in overflow vacuum configuration provides a system purge to an overflow chamber and needle purge in addition to a fixed sample.
  • The unique design offers a one-handle operation by multiple valves, allowing for sampling reactors and vessels at atmospheric or vacuum conditions.
Unit of Measure

0 - off

N/A
 

1 - vacuum

N/A
 

2 - system purge

N/A
 

3 - sample

N/A
 

4 - back purge

N/A
 

5 - off

N/A
 

Material

N/A Stainless Steel (SS) 316 Stainless Steel (SS) 316L

Sleeve Type

N/A 60 cc sleeve with bottle retaining clip

Needle Assembly

N/A Single piece VTO needle assembly with vent to outlet connection 1/4" FNPT
Process/vent needle ID: 1.35 mm

Sample Chamber

N/A 50 cm³

Valves

N/A

Two and three-way ball valves typeW83
PTFE seats, Fluorocarbons (FKM) A O-rings
Pressure range 103 bar at 20°C (1500 psig at 70°F)
Temperature range -17/+232°C (0/+450°F)

Operation

N/A Manual

Connections

N/A 1/4" FNPT. Regulator, gauge and check valve included

Venturi Out (Female National Pipe Thread (FNPT))

N/A 1/2 in

Please Note

N/A

The above is a basic specification only. DOPAK® Samplers can be offered with a wide variety of options as mentioned below.

Options

N/A
  • Spring return handle
  • Lockable handle
  • Mounting plate
  • Pipe stand
  • Block valve
  • Flow meter
  • Enclosure
  • Sample cooler
  • Mounting bracket
  • Continuous needle purge
  • Exotic materials
  • Larger/smaller sample size

N/A

  • Liquid Sampling at low and elevated pressure
  • Closed sampling with lower vapour pressure (P = < 0,7 bar)
  • Corrosive, hazardous liquids
  • Zero emission sampling from process lines or from top of reactor below atmospheric conditions

N/A

N/A

  • Atmospheric and vacuum applications
  • Representative sampling
  • Zero dead volume
  • Closed sampling
  • One handle operation
  • Fixed volume sampling
  • Purging of sampler