Request Information
  • The ability to install the sampler directly in the process line ensures optimal retrieval of a representative liquid sample.
  • The DPT type of sampler in on/off configuration allows the product to flow directly into the sample bottle via an in line sample valve at a recommended maximum operating pressure of 8 bar.
  • This liquid sampler is operator friendly and provides zero emission.
Unit of Measure

0 - off

 N/A
 

1 - sample

 N/A
 

2 - off

 N/A
 

Material

 N/A Stainless Steel (SS) 316 Stainless Steel (SS) 316L

Sleeve Type

 N/A 60 cc sleeve with bottle retaining clip

Needle Assembly

 N/A Single piece VTO needle assembly with vent to outlet connection 1/4" FNPT

Valves

 N/A

Inline valve. PTFE seats Fluorocarbons (FKM) A O-ring
Pressure range 16 bar at 20°C (232 psig at 70°F)
Temperature range -40/+200°C (-40/+392°F)

Operation

 N/A Spring Return

Connections

 N/A 1" - 150 lbs RF ANSI B16.5 flanges

Please Note

 N/A

The above is a basic specification only. DOPAK® Samplers can be offered with a wide variety of options as mentioned below.

Options

 N/A
  • Lockable handle
  • Enclosure
  • Steam sterilising cap
  • Welded connection
  • Bottle or needle purge
  • Wafer style valve
  • Exotic materials
  • Larger/smaller sample size
  • Spindle extension
  • Bellow seals
  • PFA lined valve
  • Steam jacket

N/A

  • Liquids at lower pressure (P = < 8 bar)
  • Closed Sampling with lower vapour pressure (P = < 0,7 bar)
  • In line closed liquid sampling
  • Corrosive hazardous liquids
  • Zero emission sampling from pipelines

N/A

N/A

  • Sampling directly under process conditions
  • Low pressure application
  • Representative sampling
  • Zero dead volume
  • Closed sampling