Request Information
  • The ability to purge the sample point ensures optimal retrieval of a representative, contamination free sample.
  • The S23 type sampler configuration special for high temperature provides a system purge and a fixed sample volume at the required temperature.
  • A separate cooler is therefore not necessary.
  • The unique design offers a one-handle operation by multiple valves, allowing for sampling independent of the process conditions.
  • These features provide sample accuracy and safety.
Unit of Measure

0 - off

 N/A
 

1 - system purge

 N/A
 

2 - off/cooling

 N/A
 

3 - sample

 N/A
 

4 - off

 N/A
 

Material

 N/A Stainless Steel (SS) 316 Stainless Steel (SS) 316L

Sleeve Type

 N/A 60 cc sleeve with bottle retaining clip

Needle Assembly

 N/A Single piece VTO needle assembly with vent to outlet connection 1/4" FNPT
Process/vent needle ID: 1.35 mm

Sample Chamber

 N/A 50 cm³

Valves

 N/A

Two-way high temperature needle valves type UW
PTFE seats, Fluorocarbons (FKM) A O-rings
Pressure range 103 bar at 20°C (1500 psig at 70°F)
Temperature range -29/+648°C (-20/+1200°F)

Operation

 N/A Manual

Connections

 N/A 1/4" FNPT, regulator, gauge and check valve included
Cooling in/out: 1/2" FNPT

Please Note

 N/A

The above is a basic specification only. DOPAK® Samplers can be offered with a wide variety of options as mentioned below.

Options

 N/A
  • Mounting plate
  • Pipe stand
  • Block valve
  • Flow meter
  • Enclosure
  • Mounting brackets
  • Steam sterilising cap
  • Welded connections
  • Continuous needle purge
  • Exotic materials
  • Larger/smaller sample size
  • Temperature indicator

N/A

  • Liquid sampling at low and elevated pressure
  • Closed Sampling with low and elevated vapour pressure
  • Fixed volume sampling
  • Corrosive, hazardous liquids
  • Zero emission sampling from pipelines and pump around loop from reactors
  • Possibility for small (1cc) sampling

N/A

N/A

  • Sampling independent of process conditions
  • Representative sampling
  • Zero dead volume
  • Closed sampling
  • One handle operation
  • Purging of sampler
  • Positive vent line shut off
  • Cooling of the sample
  • High pressure and vacuum applications