Request Information
  • The ability to connect the liquid sampler close to the sample point ensures optimal retrieval of a representative liquid sample.
  • The DPM type sampler in on/off configuration allows the product to flow directly into the sample bottle via an angled two-way valve at a recommended maximum operating pressure of 8 bar.
  • This liquid sampler offers one-handle operation, providing safety for the operator and zero emission.
Unit of Measure

0 - off

 N/A
 

1 - sample

 N/A
 

2 - off

 N/A
 

Material

 N/A Stainless Steel (SS) 316 Stainless Steel (SS) 316L

Sleeve Type

 N/A 60 cc sleeve with bottle retaining clip

Needle Assembly

 N/A Single piece VTO needle assembly with vent to outlet connection 1/4" FNPT
Process/vent needle ID: 1.35 mm

Valves

 N/A

Three-way ball valve type W83
PTFE seats, Fluorocarbons (FKM) A O-rings
Pressure range 103 bar at 20°C (1500 psig at 70°F)
Temperature range -17/+232°C (0/+450°F)

Operation

 N/A Manual

Connections

 N/A 1/4" FNPT

Please Note

 N/A

The above is a basic specification only. DOPAK® Samplers can be offered with a wide variety of options as mentioned below.

Options

 N/A
  • Spring return handle
  • Lockable handle
  • Mounting plate
  • Pipe stand
  • Block valve
  • Flow meter
  • Enclosure
  • Sample cooler
  • Mounting bracket
  • Steam sterilising cap
  • Welded connection
  • Continuous needle purge
  • Exotic materials
  • Larger/smaller sample size

N/A

  • Liquids at lower pressure (P = < 8 bar)
  • Closed sampling with lower vapour pressure (P = < 0,7 bar)
  • Corrosive, hazardous liquids
  • Sampling from pipelines and tanks
  • Zero emission sampling

N/A

N/A

  • Sampling directly under process condition
  • Low pressure application
  • Representative sampling
  • Minimal dead volume
  • Closed sampling