Request Information
  • The ability to connect the sampler close to the sample point, by means of an anti static, fire safe process ball valve with reduced bore.
  • The HD type sampler in straight on/off configuration allows product to flow directly into the sampler via a two way valve at a recommended maximum operating pressure of 8 bar.
  • This sampler is equipped with a spring return handle, ensures optimal retrieval of a representative liquid sample.
  • The liquid sampler offers one-handle operation, providing safety for the operator and zero emission.
Unit of Measure

0 - off

 N/A
 

1 - sample

 N/A
 

2 - off

 N/A
 

Material

 N/A Stainless Steel (SS) 316 Stainless Steel (SS) 316L

Sleeve Type

 N/A 60 cc sleeve with bottle retaining clip

Needle Assembly

 N/A Single piece VTO needle assembly with vent to outlet connection 1/4" FNPT
Process/vent needle ID: 1.35 mm

Valves

 N/A

Straight ball valve
PTFE seats. Fire safe, anti static
Pressure range 19 bar at 20°C (275 psig at 68°F)
Temperature range -29/+250°C (-20/+482°F)

Operation

 N/A Spring Return

Connections

 N/A 1/2" - 150 lbs RF ANSI B16.5

Please Note

 N/A

The above is a basic specification only. DOPAK® Samplers can be offered with a wide variety of options as mentioned below.

Options

 N/A
  • Heating jacket for valve and needle assembly
  • Continuous needle purge
  • Exotic materials
  • Larger/smaller sample size

N/A

  • Liquids at lower pressure (P = < 8 bar)
  • Closed Sampling with lower vapour pressures (P = < 0,7 bar)
  • Corrosive, hazardous liquids
  • Sampling from pipelines and tanks
  • Fire safe antistatic valves
  • Zero emission sampling

N/A

N/A

  • Sampling directly under process conditions
  • Low pressure application
  • Representative sampling
  • Minimal dead volume
  • Closed sampling
  • Anti static and fire safe process valve