Request Information

The Sample Recovery System recovers a liquid sample from the sample bottle without the risk of spillage or contamination.

  • Provide a new septum on your sample bottle. Insert the bottle, with cap and septum into the sleeve.
  • Put the special bottle retaining clip in place and turn the thumb screw until the bottle is fixed in the sleeve.
Unit of Measure

0 - off

 N/A
 

1 - recovery

 N/A
 

2 - vent

 N/A
 

3 - off

 N/A
 

Material

 N/A Stainless Steel (SS) 316 Stainless Steel (SS) 316L

Sleeve Type

 N/A 60 cc sleeve with bottle retaining clip

Needle Assembly

 N/A Single piece VTO concentric needle assembly with vent to outlet connection 1/4" FNPT
Process/vent needle ID:1.35 / 3.00 mm

Valves

 N/A

Three-way ball valve type H7165
PTFE seats
Pressure range 34 bar at 20°C (493 psig at 70°F)
Temperature range -40/+177°C (-40/+350°F)

Operation

 N/A Manual

Connections

 N/A 1/4" FNPT

Please Note

 N/A

The above is a basic specification only. DOPAK® Samplers can be offered with a wide variety of options as mentioned below.

Options

 N/A
  • Spring return handle
  • Lockable handle
  • Pipe stand
  • Enclosure
  • Mounting brackets
  • Exotic materials
  • Larger/smaller sample size
  • Temperature indicator

N/A

  • Plant laboratories
  • Liquid sample bottle recovering

N/A

N/A

  • Closed recovery/no spillage
  • One handle operation
  • Purging of the system
  • Depressurisation of sample bottle