S32 Back Purge Configuration with Vacuum Connection (E1) On Dopak, Inc.

The ability to create an under pressure in the sample bottle by a connection to a vacuum source ensures optimal retrieval of a representative, contamination free sample from processes at vacuum conditions or atmospheric pressure.
The S32 type of sampler in back purge configuration allows a gas to purge the sampler and process connection prior to sampling ensuring a fresh sample.
All S32 type of samplers offer a one handle operation by multiple valves.

Unit of Measure

Operating Function | Specifications | Applications | Video | Features

Material	N/A Stainless Steel (SS) 316 Stainless Steel (SS) 316L
Sleeve Type	N/A 60 cc bayonet sleeve
Needle Assembly	N/A Single piece VTO needle assembly with TTC ring and vent to outlet connection 1/4" FNPT Process/vent needle ID: 1.35 mm
Sample Chamber	N/A 50 cm³
Valves	N/A Process: Three-way ball valve type W83 PTFE seats, Fluorocarbons (FKM) A O-rings Pressure range 103 bar at 20 ºC (1500 psig at 70ºF) Vent: Two way ball valve type W43 PTFE seats Pressure range 206 bar at 20 ºC (3000 psi at 70 ºF)
Operation	N/A Manual by Gearbox
Connections	N/A 1/4" FNPT, regulator, gauge and check valve included.
Please Note	N/A The above is a basic specification only. DOPAK® Samplers can be offered with a wide variety of options as mentioned below.
Options	N/A Spring return handle Lockable handle Mounting plate Pipe stand Block valve Flow meter Enclosure Sample cooler Mounting bracket Steam sterilising cap Welded connection Exotic materials Larger/smaller sample size

N/A

Liquid Sampling at low and elevated pressure
Closed sampling with lower vapour pressure (P = < 0,7 bar)
Corrosive, hazardous liquids
Zero emission sampling from process lines or from top of reactor below atmospheric conditions

N/A

N/A

0 - off