Request Information
  • The ability to purge the sample point ensures optimal retrieval of a representative liquefied gas sample.
  • The S32-LG type sampler in purge expansion configuration provides a system purge in addition to sampling in a sample cylinder with a predefined filling rate.
  • The predefined filling rate is achieved by using an expansion chamber.
  • The system is equipped with an extra valve on the expansion chamber to enable purging of the expansion chamber with an inert gas for product with a boiling point around atmospheric conditions.
  • This liquefied gas sampler offers one-handle operation by multiple valves.
  • These features provide sample accuracy, safety for the operator and the possibility of zero emission.
  • This sampler type is suitable for liquefied gas and liquid with high vapor phase.
Unit of Measure

0 - off

 N/A
 

1 - system purge

 N/A
 

2 - expansion

 N/A
 

3 - vent/purge

 N/A
 

4 - off

 N/A
 

Material

 N/A Stainless Steel (SS) 316 Stainless Steel (SS) 316L

Cylinder Type

 N/A 500 cm³

Expansion Chamber (20 Percent (%) of Sample Volume)

 N/A 100 cm³

Valves

 N/A

Three-way ball valve type W83. PTFE seats, Fluorocarbons (FKM) A O-rings
Pressure range 103 bar at 20°C (1500 psig at 70°F)
Temperature range -17/+232°C (0/+450°F)

Operation

 N/A Manual

Connections

 N/A 1/4" FNPT. Regulator, pressure gauge and check valve included

Please Note

 N/A

The above is a basic specification only. DOPAK® Samplers can be offered with a wide variety of options as mentioned below.

Options

 N/A
  • Spring return handle
  • Lockable handle
  • Pipe stand
  • Block valve
  • Flow meter
  • Enclosure
  • Sample cooler
  • Exotic materials
  • Larger/smaller sample size

N/A

  • Predefined sample volume
  • Closed sampling of liquefied gas
  • Fixed external outage (expansion chamber)
  • High vapour pressure liquids
  • Zero quick connect vapour release

N/A

N/A

  • Sampling in cylinder with predefined filling rate
  • Representative sampling
  • Zero dead volume
  • Closed sampling
  • One handle operation of multiple valves
  • Fixed volume sampling
  • Purging of sampler
  • No direct connection between vent line and process lines
  • Depressurising of quick connect couplings
  • No outage tube needed