Request Information
  • The ability to purge the needle assembly, both before and after sampling, ensures there is no residue build up in the needle assembly after retrieval of a representative liquid sample.
  • The DPM type of sampler in an inline needle purge configuration allows product to flow directly into the sampler via an inline sample valve.
  • Recommended maximum operating pressure is 8 bar.
  • This liquid sampler offers one-handle operation, providing safety for the operator and zero emission.
Unit of Measure

0 - off

 N/A
 

1 - sample

 N/A
 

2 - needle purge

 N/A
 

3 - off

 N/A
 

Material

 N/A Stainless Steel (SS) 316 Stainless Steel (SS) 316L

Sleeve Type

 N/A 60 cc sleeve with bottle retaining clip

Needle Assembly

 N/A Single piece VTO needle assembly with vent to outlet connection 1/4" FNPT
Process/vent needle ID: 1.35 mm

Valves

 N/A

In line valve
Pressure range 206 bar at 20°C (3000 psig at 70°F)
Temperature range -20/+230°C (-4/+446°F)

Operation

 N/A Manual

Connections

 N/A Process: 1/4" FNPT
Purge: 1/4" FNPT, regulator, gauge and check valve included
Vent: 1/4" FNPT

Please Note

 N/A

The above is a basic specification only. DOPAK® Samplers can be offered with a wide variety of options as mentioned below.

Options

 N/A
  • Lockable handle
  • Enclosure
  • Steam sterilising cap
  • Exotic materials
  • Solvent purge facility
  • Larger/smaller sample size

N/A

  • Liquids at lower pressure (P = < 8 bar)
  • Closed sampling with lower vapour pressure (P = < 0,7 bar)
  • Corrosive, hazardous liquids
  • Sampling from pipelines and tanks
  • Zero emission sampling

N/A

N/A

  • Sampling directly under process conditions
  • Low/elevated pressure applications
  • Representative sampling
  • Zero dead volume
  • Closed sampling
  • No build up of sample material in the needle assembly
  • Inertizing of bottle