Piston valve liquid samplers (DPJ Series)
Liquid Samplers
- Liquid sampler to take representative samples of liquids with higher viscosity by using piston (RAM type) valves.
- Outlet of sample valve will be purged to ensure zero dead volume and a clean sampler after sampling.
- The DPJ type samplers are built from high quality stainless steel.
- Installation by means of a threaded connection or a flange.
- Easy to use samplers providing optimum safety for the operator and the environment.
- Other purge options such as solvent purge are available.
Item # |
Item Name |
Material |
Sleeve Type |
Needle Assembly |
Operation |
---|---|---|---|---|---|
C1 | N/A Purge Configuration | Material N/A Stainless Steel (SS) 316 Stainless Steel (SS) 316L | Sleeve Type N/A 60 cc sleeve with bottle retaining clip |
Needle Assembly
N/A Single piece VTO needle assembly with vent to outlet connection 1/4" FNPT Process/vent needle ID: 1.35 mm |
Operation N/A Manual |
C2 | N/A Fixed Volume Configuration | Material N/A Stainless Steel (SS) 316 Stainless Steel (SS) 316L | Sleeve Type N/A 60 cc sleeve with bottle retaining clip |
Needle Assembly
N/A Single piece VTO needle assembly with vent to outlet connection 1/4" FNPT Process/vent needle ID: 1.35 mm |
Operation N/A Manual |
C3 | N/A Fixed Volume with Cooling/Heating Jacket | Material N/A Stainless Steel (SS) 316 Stainless Steel (SS) 316L | Sleeve Type N/A 60 cc sleeve with bottle retaining clip |
Needle Assembly
N/A Single piece VTO needle assembly with vent to outlet connection 1/4" FNPT Process/vent needle ID: 1.35 mm |
Operation N/A Manual |
C4 | N/A Solvent Purge Configuration | Material N/A Stainless Steel (SS) 316 Stainless Steel (SS) 316L | Sleeve Type N/A 60 cc sleeve with bottle retaining clip |
Needle Assembly
N/A Single piece VTO needle assembly with vent to outlet connection 1/4" FNPT Process/vent needle ID: 1.35 mm |
Operation N/A Manual |