• csm_SRS-SYSTEM_BOTTLE_UP_15.53.31_b175472f7e
The Sample Recovery System recovers a liquid sample from the sample bottle without the risk of spillage or contamination.
  • Provide a new septum on your sample bottle. Insert the bottle, with cap and septum into the sleeve.
  • Put the special bottle retaining clip in place and turn the thumb screw until the bottle is fixed in the sleeve.
1 - 1 of 1 | Results Per Page | View | Unit of Measure
1 
Request Information

Item #

Material

Sleeve Type

Needle Assembly

Valves

Operation

N/A Stainless Steel (SS) 316 Stainless Steel (SS) 316L N/A 60 cc sleeve with bottle retaining clip N/A Single piece VTO concentric needle assembly with vent to outlet connection 1/4" FNPT
Process/vent needle ID:1.35 / 3.00 mm 		N/A Three-way ball valve type H7165
PTFE seats
Pressure range 34 bar at 20°C (493 psig at 70°F)
Temperature range -40/+177°C (-40/+350°F) 		N/A Manual
1 - 1 of 1 | Results Per Page | View | Unit of Measure
1